Waterproofing Birmingham AL
The Basement Waterproofing Birmingham AL Locals Rely On!
Waterproofing is a process to protect the interior of your home from water damage. Waterproofing can help you save money on plumbing repair bills and prevent future problems with mold or mildew.
There are two types of waterproofing: building exterior (foundation) and structure interior (ceilings, walls). Every type has its benefits for both practicality and aesthetics. Thus, there is no right answer when choosing which one works best for your project or budget.
Homeowners must consider waterproofing their homes for their own comfort, safety, and convenience. Waterproofing can also increase the value of your home.
When you waterproof your exterior foundation, it is worth noting that this will not stop all water from entering your basement or crawlspace. It will allow for a controlled release of water to prevent damage to the structure itself as well as any items stored in these areas.
If you are looking at interior waterproofing solutions, there are many options available depending on what material you want to be installed (vinyl sheet flooring versus rubber membrane).
Ceiling tiles are another option though they have limitations with humidity control where there are showers above them since steam does penetrate through them over time which could cause mold growth behind the ceiling tile joints if proper ventilation is not present.
However, these difficult decisions are not for you to make. Waterproofing companies Birmingham AL guide you in choosing the best type of waterproofing for your home.
At Birmingham Waterproofing Solutions, we take pride in providing the best waterproofing services for new homes and existing construction, as well as offering reliable advice for what waterproofing method is best suited to each homeowner’s needs.
Call us today to learn about our waterproofing services.
Overview of Waterproofing Solutions
Waterproofing can be divided into two broad categories — exterior and interior waterproofing.
Exterior Waterproofing Solutions
You may choose exterior sealants to protect the foundation of your home from water damage caused by floods, ground saturation issues due to excessive rainfall, leaks in eaves troughs, or gutters that did not drain properly after a storm.
On the other hand, you might consider applying an elastomeric paint coating on stone walls to keep moisture out as well as prevent algae growth through porous stonewalls over time which could lead to discoloration and deterioration.
It is also possible that you opt for polyurethane sealant to be applied on the exterior of your home in order to prevent water seepage into the basement or crawlspace.
Interior Waterproofing Solutions
If you want to waterproof existing interior surfaces, there are several options available for this purpose as well.
For example, vinyl sheet flooring is more durable and less expensive than carpet, which makes it a great option if installing new carpet seems too costly for your budget.
If you prefer tiles over hardwood floors, then consider rubber membrane instead since it does not require padding underneath, unlike its counterpart.
Types of Waterproofing
One of the Best Waterproofing Companies Birmingham AL Locals Rely On!
Nowadays, you can avail different types of waterproofing, based on your needs. However, always remember that not all are suitable for your situation or budget.
Cementitious Waterproofing is the simplest way to waterproof a home since it involves the use of concrete to fill in the cracks where water might seep through.
Waterproofing with cement is also inexpensive since it can be applied quickly without requiring specific skills or equipment other than a trowel and bucket for mixing purposes.
When you use Cementitious Waterproofing, remember that this type cannot protect your basement against flooding because it does not prevent ground saturation problems which could cause leakage into the foundation.
Rubber Membrane Waterproofing
Rubber membrane waterproofing involves applying roof membranes made out of rubber onto exterior walls using adhesive so as to seal up any areas where rainwater may enter, such as around window frames, siding joints, chimneys, etc.
The Bituminous Membrane used in waterproofing is made using a mineral that has a high resistance to heat and pressure.
Waterproofing with Bituminous Membrane is used as an insulating material in roof construction. It prevents water from penetrating the seams of your home’s exterior walls while also protecting any insulation materials underneath against damage due to moisture infiltration.
Waterproofers generally use bituminous materials when they want to prevent cancer-causing agents from entering through porous surfaces.
Polyurethane Liquid Membrane Waterproofing
Polyurethane can also be used to waterproof a property since it is applied in liquid form. Waterproofing with polyurethane is very similar to applying paint to the exterior of your home’s walls. It has a protective function.
Plus, it prevents water penetration into masonry surfaces such as stone or brick.
Why Waterproof Your Home?
If you are wondering why you should opt for waterproofing Birmingham services, here are some reasons to do so.
Waterproofing your home is a good investment in the long run since it solves many problems that your structure might face in the future.
Prevents Mold and Water Damage
When you do not waterproof your home sufficiently, it leads to mold growth which is harmful to health since molds spoil the air quality of our homes along with causing damage to walls or floors.
Waterproofing also prevents water leakage from behind walls as well as basements which cause lots of damage due to humidity if they are exposed for too long without proper waterproofing services.
After all, wet living conditions can lead to serious damages over time, including wood rot, so don’t let this happen.
Increases Home's Value
Waterproofing your home also increases its value. Waterproofing is a process that not only prevents water damage but also provides your home with extra protection against water damage.
This means that it can be sold at a higher price after waterproofing services are performed since the structure becomes more durable and sturdy, making it less prone to getting damaged by external factors or natural disasters.
Therefore, you should get in touch with us today to learn all about our waterproofing services and choose the best solution for your property.
How Long Does It Take to Waterproof a Basement?
The basement waterproofing Birmingham AL process can take anywhere from a few days to a week, depending on the size of your basement.
Waterproofing Birmingham contractors will need access to all areas that are not waterproofed so they can inspect and repair any problem spots where water is seeping in. Waterproofing experts would also want to test for moisture levels periodically throughout the process as well.
The first step Waterproofing experts take during the basement waterproofing process is inspecting your foundation walls for cracks or gaps that allow water into your home’s foundation.
If there are noticeable signs of wear on any exterior wall, such as cracking or chipping concrete around windows, walls, doors, or steps, then you may have an issue with leaks. In this scenario, the time for waterproofing may be longer.
When you hire our waterproofing contractors Birmingham AL for basement waterproofing, we will let you know the timeline beforehand. Therefore, you can sort your schedule accordingly. Since we finish our work on time, you will never have to face any delays.
The Waterproofing Contractors Birmingham AL Experts
You should get your house waterproofed every 12 to 15 years. That’s a good estimate for the average family home that is occupied year-round, but if you have a house with multiple levels or brick veneer walls, experts recommend lining up your waterproofing every seven years.
Waterproofing can be done at any time after construction and before major living areas are built in a basement because it doesn’t interfere with plumbing or other fixtures.
Waterproofing isn’t just about preventing dampness. When applied by an experienced contractor who has worked on older homes like yours, waterproofed surfaces will last longer than non-waterproofed surfaces and prevent costly repairs for many decades. Water-resistant materials also add safety to your home.
Waterproofing is a good idea when you have any surface in your home that has experienced water damage or dampness.
If the materials used for building your house showed signs of deterioration within ten years after it was built or last renovated and waterproofed, or if you want to prevent further damage from occurring, such as roof leaks at joints, you should opt for waterproofing.
This is imperative because leaky seams allow moisture into the structure and cause rot which destroys wood beams and joists over time.
Waterproofing lasts for about 10 years on average. Waterproofing provides full protection from water leaks and any other moisture problems that could affect the structure of your home or building.
Many waterproofing companies Birmingham offer financing options so you don’t need a lump sum payment upfront which can help make this project more affordable than expected.
Although 10 years is the standard, you may need to get waterproofing redone earlier if you see cracks or other signs of water damage in your bathroom.